Mitsubishi Electric MELFA FR CR800 Series User Manual page 307

If you select the robot controller, the named signal definition file is loaded from the robot controller.
14.3.2.5. Saving definition information for named signals to a controller
When you click the [Save] button, the "Select locate" screen asking you to select the save destination is
displayed.
Figure 14-35 Device Selection
Select the device to save to, and then click the [OK] button.
When PC is selected, the screen for selecting files on the PC is displayed.
If you select the robot controller, the named signal definition file is saved to the robot controller.
14-307 14-307