Table of Contents
Advertisement
15.2. Initialization
This initializes information in a robot controller.
Here, you can initialize the following information in a robot controller.
(1) Setting the robot controller clock
(2) Initializing all programs in the robot controller
(3) Initialize the remaining battery time in the robot controller
(When connected to the CR800 series robot controller, the remaining battery time is not displayed.)
(4) Check the serial number in the robot controller and set the serial number for the connected robot
(Serial number checking and setting can only be used with CR800/750/700 series robot controllers.)
15.2.1. Starting
Use the initialization function while connected to the robot controller.
From the project tree, double-click the target project [Maintenance] -> [Initialize].
15.2.2. Setting the time in the robot controller
You can set the robot controller clock.
On the initialization screen, click the [Set time] button.
Set the new date and time, then click the [OK] button.
You can set the current date and time from your computer by clicking the [Get PC time] button.
15-334
Figure 15-9 Starting Initialization Screen
Figure 15-10 Time Setting Screen
15-334
Advertisement
Table of Contents
