Table of Contents
Advertisement
21.20. Robot Parts Design
Robot parts are displayed on each axis of the robot on the 3D monitor
switched according to signal state, for example.
Robot parts
that you design are registered to the workspace. For this reason,
before
robot parts
display settings are made on the layout tree. Create the
make the display settings on the layout tree.
21.20.1.
Robot parts
Click the [3D view] tab ->
Parts
File Manager" screen is displayed.
Except for the [Edit file] button, the layout files are changed to
as in "21.12.3 Layout file manager". So, refer to this section for details on operation in the
manager.
- Editing
robot parts
files
Double-click the selected edit file in the parts list, or click the [Edit] button to open the parts editing dialog and
display the edit tree. You can also open the parts editing screen by double-clicking the already set parts in the
layout tree.
21-598
file manager
[Robot Parts
File] group ->
Figure 21-132 Display of the
Figure 21-133 Editing Robot Parts
and the robot parts to display can be
[Robot Parts
File Manager] button on the ribbon. The
"Robot Parts
File Manager" Screen
robot parts
files. However, operations are the same
robot parts
must be designed
robot parts
file to be used and then
robot parts
"Robot
file
21-598
Advertisement
Table of Contents
