3.2.2 Setting the Connection to GX Developer
In order to setup GX Developer and PLC CPU, it is necessary to open a project on GX Developer.
(1) Turn ON the PLC CPU. Start GX Developer, and select [New project] from the [Project] menu. If a project is
already created, open it. ([Project]-->[Open project])
(2) If "New project" is selected, the "New project" dialogue box will appear. In "PLC series", select "QCPU (Qmode)",
and in "PLC Type", select the PLC CPU type to connect. Click "OK".
(3) From the menu, select [Online]--->[Transfer setup...].
C70 Setup Manual
3.2 GX Developer
67