Mitsubishi Electric C70 Setup Manual page 197

MITSUBISHI CNC
Appendix 1 Explanation of Parameters
【#1037(PR)】 cmdtyp Command type
Set the G code list and compensation type for programs.
1 : List1(for M)
2 : List1(for M)
3 : List2(for L)
4 : List3(for L)
There are some items in the specifications that can be used or cannot be used according to the
value set in this parameter.
The file structure may also change depending on the compensation data type.
Thus‚ after changing this parameter‚ initialize the system with "#1060 SETUP".
# (1060) DATA ( 1) (
"BASE PARA SET? (Y/N)" : N
"FORMAT? (Y/N)" : Y
"SETUP COMPLETE"
(Note) Executing formatting in the above process will initialize the machining program, tool offset
【#1038】 plcsel
Not used. Set to "0".
【#1039(PR)】 spinno Number of spindles
Select the number of spindles.
0: No spindle
1 to 7: One to Seven spindles
【#1040(PR)】 M_inch Constant input (inch)
Select the unit system for setting and display regarding machine parameter and PLC interface's
position, length and speed.
0: Metric system
1: Inch system
180
Type A(one compensation amount for one compensation No.)
Type B(shape and wear compensation amounts for one comp. No.)
Type C(shape and wear compensation amounts for one comp. No.)
Ditto
)
(Note)
data and common variables. Back up necessary machining programs, tool offset data, and
common variables in an external memory before initializing.
INPUT
INPUT
INPUT