Mitsubishi Electric C70 Setup Manual page 55

MITSUBISHI CNC
2 GOT Initial Setup
(8) Check the setting. If correct, click "Finish >".
(9) When the "Screen Property" window appears, click "OK". The base screen will appear.
(10) Select "Ethernet" from "Common Settings", and then set the following data. Click "OK" after setting the data.
N/W No.: 239 (fixed value of CNC CPU module)
PC No.: 2
Type: Q17nNC
IP address: CNC CPU module's IP address (Example: 192.168.1.2)
38