Mitsubishi Electric C70 Setup Manual page 396

【#7312】 Tmac Type
Set the type for when calling the macro with a T command.
This is valid when "#1197 Tmac" is set to "1".
0: M98 P △△△△ ; and equivalent value call
1: G65 P △△△△ ; and equivalent value call
2: G66 P △△△△ ; and equivalent value call
3: G66.1 P △△△△ ; and equivalent value call
others: M98 P △△△△ ; and equivalent value call
【#7313】 Tmac <Program No.>
Set the program No. for when calling the macro with a T command.
This is valid when "#1197 Tmac" is set to "1".
---Setting range---
0 to 99999999
【#27000】 Nmac
Select whether to make the N code macro valid.
0 : Invalid
1 : Valid
【#27001】 N [01] Code
Set the N code for macro call with N command.
Wildcard character "," can be used.
(ex.) "5,,," : N5000 to N5999
When a same N code is designated, the priority will be given to the one registered first.
---Setting range---
0 to 99999
(Max. 5 digits including wildcard character ",".)
【#27002】 N [01] Program No.
Designate the program No. to call.
---Setting range---
0 to 99999999
【#27011】 N [02] Code
Set the N code for macro call with N command.
Wildcard character "," can be used.
(ex.) "5,,," : N5000 to N5999
When a same N code is designated, the priority will be given to the one registered first.
---Setting range---
0 to 99999
(Max. 5 digits including wildcard character ",".)
【#27012】 N [02] Program No.
Designate the program No. to call.
---Setting range---
0 to 99999999
C70 Setup Manual
Appendix 1.12 Macro List
379