Service Code Setup (For Hotel) - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 11-14 : Service Code Setup (for Hotel) to customize the Service Codes which are used
with the Hotel/Motel feature. You can customize additional Service Codes in Programs 11-10 ~ 11-13,
11-15 and 11-16. The Service Codes can be used only at telephones registered as hotel terminals in
Program 42-02.
The following chart shows:
The number of each code (01~18).

The function of the Service Code.

The type of telephones that can use the Service Code.

The default entry.

Input Data
Item
No.
01
Set DND for Own Extension
02
Cancel DND for Own Extension
03 Set DND for Other Extension
04 Cancel DND for Other Extension
05
Set Wake Up Call for Own Extension
06
Cancel Wake Up Call for Own Extension
07 Set Wake Up Call for Other Extension
08 Cancel Wake Up Call for Other Extension
09 Set Room to Room Call Restriction
10
Cancel Room to Room Call Restriction (Hotel)
11
Change Toll Restriction Class for Other Extension
12 Check-In
13 Check-Out
2-126
Program 11 : System Numbering

11-14 : Service Code Setup (for Hotel)

Item Terminals Default
MLT, SLT 627
MLT, SLT 628
MLT, SLT 629
MLT, SLT 630
MLT, SLT 631
MLT, SLT 632
MLT, SLT 633
MLT, SLT 634
MLT, SLT 635
MLT, SLT 636
MLT, SLT 637
MLT, SLT 638
MLT, SLT 639
Program 11 : System Numbering
Issue 4.0