Class Of Service Options (Incoming Call Service) - NEC univerge SV9100 Programming Manual

20-09 : Class of Service Options (Incoming Call Service)

Level:
IN
Description
Use Program 20-09 : Class of Service Options (Incoming Call Service) to define the incoming call
feature availability for each extension Class of Service (COS).
Input Data
Class of Service Number
Item
No.
01 Second Call for DID/DISA/DIL/E&M Override
Turn off or on the extension ability to receive a
second call from a DID, DISA, DIL, or tie line
caller.
With this option set to 1, the

destination extension must be busy for a
second DNIS caller to ring through. If the
destination extension does not have a trunk
or CAP key available for the second call
and a previous call is ringing the extension
but has not yet been answered, the second
caller hears busy regardless of this
program setting.
02 Caller ID Display
Turn off or on the Caller ID display at an
extension.
03 Sub Address Identification
Define whether or not an extension displays
the Caller Sub-Address.
04 Notification for Incoming Call List
Existence
Determine whether or not an extension display
shows Check List when an incoming call is
missed by a user.
2-262
Program 20 : System Option Setup
Item
01~15
Default
Input
Data COS COS
01~14
0 = Off 1
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
0 = Off 0
1 = On
Program 20 : System Option Setup
Issue 4.0
Related
Program
15
1
0 15-02-08
0
0 20-09-02