NEC univerge SV9100 Programming Manual page 868

Alarm
Type Report
No.
29 0 0 Charge
Management
Buffer full
30 2 0 SMDR Buffer
full
31 1 0 Auto Dial after
Sensor
Detection
32 1 0 Remote
watch
function
performs auto
dial.
33 1 0 Fail to auto
dial by
security
function.
34 --- Reserved ---
35 0 0 CS Blocking
2-828
Name Content of Alarm
The temporary buffer for
the charge management in
main device overflowed,
and a part of unoutput
charge data disappeared
because it could not output
the charge management
data.
The temporary buffer for
SMDR in main device
overflowed, and a part of
unoutput SMDR data
disappeared because it
could not output SMDR
data.
Auto dialing occurs after
sensor detection.
Remote watch function
performs auto dial.
Fail to auto dial by security
function.
The link of the CSIU and
CS came off.
Cause Action
1. The charge data 1. Print and delete the
is printed and charge data at the
not deleted at simple charge
the simple management.
charge
management.
2. Connect the charge
management
2. The charge data software for the
is not output to charge management
PC for the software and output
charge the charge data.
management
software.
1. Problem of 1. Confirm whether
wiring to there is problem in
connect main wiring to connect a
device with PC. main device with
PC.
2. PC Problem.
2. Execute the
reactivation of PC.
Sensor detect an No action needed.
abnormality and
makes an
emergency call.
No action needed/
All auto dial trunks No action needed.
are busy.
1. Outgoing noise. Confirm the following
when it happens
frequently during
2. Method of setting
operation.
up CS.
1 Confirm CS is
3. Wiring to
normally connected.
connect CSIU
unit with CS.
2. Confirm the wiring
between CSIU-CS is
4. Hard defect of
normal.
CS.
3. Exchange CS.
5. Hard defect of
CSIU.
4. Exchange CSIU.
Program 90 : Maintenance Program
Issue 4.0
Alarm
Recovery
Status
When the ERR
output is
REC
restarted, the
error is
recovered.
However, the
charge
management
data after the
error occurs is
not recorded.
When the ERR
output is
REC
restarted, the
error is
recovered.
However, the
SMDR data
after the error
occurs is not
recorded.
The error is ERR
recovered
REC
when
reconnecting
or exchanging
it.