Trunk Access Map Setup - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 14-07 : Trunk Access Map Setup to set up the Trunk Access Maps. This sets an
extension access options for trunks. For example, an extension can place only outgoing calls on trunks
to which it has outgoing access. There are 400 Access Maps with all 400 trunk ports programmed in
Map 1 with full access.
An extension can use one of the maps you set up in this program. Use Program 15-06 to assign Trunk
Access Maps to extensions. Each trunk can have one of eight access options for each Access Map.
911 calls will override Program 14-07 settings.
NOTE
Input Data
Access Map Number
Item Trunk Port
No. Number
01 001~400
Default
Access Maps 1~400 = Trunk Ports 1~400 assigned with option 7 access (incoming and outgoing access and
access when trunk is on Hold).
2-172
Program 14 : Trunk, Basic Setup
0 = No access
1 = Outgoing access only
2 = Incoming access only
3 = Access only when trunk on Hold
4 = Outgoing access and access when trunk on Hold
5 = Incoming access and access when trunk on Hold
6 = Incoming and Outgoing access
7 = Incoming access, outgoing access and access when trunk
on Hold

14-07 : Trunk Access Map Setup

001~400
Input Data
Program 14 : Trunk, Basic Setup
Issue 4.0