NEC univerge SV9100 Programming Manual page 202

Item
Item
No.
24
Trunk-to-Trunk Outgoing
Caller ID through Mode
Enable/Disable the ability to send
the original Caller ID through
when the call is Forward
Off-Premise.
25 Continued/Discontinued
Trunk-to-Trunk Conversation
Enable/Disable the ability to dial
a service code to continue or
disconnect the Trunk-to-Trunk
conversation after the alert tone
is heard.
26 Automatic Trunk-to-Trunk
Transfer Mode
27 Caller ID Refuse Setup
28 Effective of Conversation
Recording Destination for
Extension
30 Flexible Ringing by Caller ID
32 Anti-trombone Function
33 APSU Trunk Receive Gain
Additional PAD when a trunk call
connects to APSU Voice Mail.
35
DT800/DT700 Large LED
Illumination Setup
Sets LED color for incoming trunk
call. In DT800/DT700 local
terminal setting menu,
illumination setting must be
'Automatic', otherwise the
terminal will ignore PRG 14-01-
35, PRG 15-05-37 and PRG 15-
23 settings.
36
Calling Party Name Indication
(ISDN Trunk)
Shows sending caller name on
outgoing ISDN calls.
2-162
Input Data
0 = Disable (No)
1 = Enable (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = Normal Transfer (Normal)
1 = Step Transfer (Step)
0 = Disable (No)
1 = Enable (Yes)
0 = No Effect (No)
1 = Available (Yes)
0 = Disable (No)
1 = Enable (Yes)
0 = No Effect (No)
1 = Available (Yes)
1~57
(-15.5dB ~ +12.5dB in 0.5dB intervals)
2 = Red
3 = Green
4 = Blue
5 = Yellow
6 = Purple
7 = Light Blue
8 = White
9 = Rotation
0 = Disable
1 = Enable
Issue 4.0
Related
Default
Program
0
0 20-28-01
20-28-02
20-28-03
24-02-07
24-02-10
25-07-07
25-07-08
0 24-02-11
24-02-12
0
1 15-12
1 13-04
0
32 (0dB)
2
0
Program 14 : Trunk, Basic Setup