NEC univerge SV9100 Programming Manual page 203

Issue 4.0
Item
Item
No.
38 Outgoing CLI Selection
Select CLI (Calling Party
Number) sending way to trunk.
When set to 0, extension CLI
number set in PRG21-13-01,
PRG21-18-01, or PRG21-19-01is
sent according to seized trunk
type (ISDN/H.323/SIP)
automatically.
When set to 1, calling extension
number is sent as CLI.
When set to 2, extension table
number set in PRG21-25-01 is
sent as CLI.
When set to 3, 4, or 5, extension
CLI number set in PRG21-13-01,
PRG21-18-01, or PRG21-19-01is
sent to seized trunk regardless of
trunk type.
39
CLI Composition
If select default value 0:"prefer
extension", the extension's CLI is
sent out, if it is not empty. If it is
empty, the trunk's CLI is sent
instead.
If select value 1:"combine trunk +
extension", the trunk's CLI is
stored in the sending buffer,
padded with the extension's CLI.
40
ISDN Queue Announcement
Connect Mode
41 Incoming Caller Name Usage
This setting determines whether
the caller name information from
the network is valid or not. If set
to 1 (Ignore), the caller name
information the network provides
is ignored.
46 Collect Call Blocking
Set the incoming ISDN collect
call block (reject) or not for the
trunk line.
47
DTMF Receiver Type
SV9100 Programming Manual
Input Data
0 = Contract Number
1 = Extension Number
2 = Extended Table
3 = PRG 21-13
4 = PRG 21-18
5 = PRG 21-19
6 = No digits
0 = Prefer Extension
1 = Combine Trunk + Extension
0 = Send CONNECT
1 = Send PROGRESS #8
0 = Use
1 = Ignore
0 = Disable
1 = Enable
1 = Type 1
2 = Type 2
3 = Type 3
Related
Default
Program
0 21-13-01
21-18-01
21-19-01
21-25-01
0
0 22-14
22-15
41-11
41-19
0
0 20-09-09
1
2-163