Ccis Destination System Settings - NEC univerge SV9100 Programming Manual

Program 50 : Common Channel Interoffice Signaling
Level:
IN
Description
Use Program 50-03 : CCIS Destination System Settings to assign information of remote systems in a
CCIS Network.
Input Data
CCIS System ID
Item
Item
No.
01
Destination Point Code
02 CCIS Route ID
(T1 only)
03 IP Address
(IP only)
04 Point Code Availability
Conditions
None
Feature Cross Reference
None
2-634

50-03 : CCIS Destination System Settings

Description
Define the Point Code at the Destination Party.
Select the CCIS Route ID defined in Program
14-13 when the user tries to access the system
in a CCIS network.
Assign the IP Address to a CCIS System ID.
Define if the system associated with
Destination Code can be Reached (1) or Not
Reached (0). If set to 0, when using the IP-
CCIS, that system cannot be called until it is
set to 1.
Program 50 : Common Channel Interoffice Signaling Service
Issue 4.0
Service
1~255
Input Data Default
0~16367
0~8
(CCIS Route IDs 5~8
are for future use and
should not be used.)
xxx.xxx.xxx.xxx 0.0.0.0
(xxx = 0~255)
0 = Disable
1 = Enable
0
0
1