Universal Answer/Auto Answer; Table - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 23-03 : Universal Answer/Auto Answer to assign trunk routes (set in Program 14-06) to
extensions for Universal Answer. If the call ringing the paging system is in an extension assigned route,
the user can dial the Universal Answer code (
You can also use this program to let an extension user automatically answer trunk calls that ring other
extensions (not their own). When the user lifts the handset, they automatically answer the ringing calls
based on Trunk Group Routing programming (defined in Program 14-06). The extension user ringing
calls, however, always have priority over calls ringing other co-worker extensions. Refer to the Line
Preference feature in the UNIVERGE SV9100 Features and Specifications Manual for more information.
Make one entry for each Night Service mode.
NOTE
Input Data
Extension Number
Day/
Item
Night
No.
Mode
01 1~8
2-390
Program 23 : Answer Features Setup

23-03 : Universal Answer/Auto Answer

0) to pick up the call.
#
Route

Table

Default
Number
0~100 0 Let an extension user automatically
answer trunk calls that ring other
extensions. When the user lifts the
handset, they automatically answer the
ringing calls based on Trunk Group
Routing programming (defined in
Program 14-06).
001 ~ 960
Description
Program 23 : Answer Features Setup
Issue 1.0
Related
Program
14-06