Program 16 : Department Group Setup; Department Group Basic Data Setup - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 16-01 : Department Group Basic Data Setup to set the function mode for each
department group. There are 64 available Department Groups.
Input Data
Department Group Number
Item
No.
01 Department Name
02 Department Calling Cycle
Set the call routing for Department Calling.
Routing can be either circular (cycles to all
phones in group) or priority (cycles to
highest priority extensions first).
03 Department Routing when Busy (Auto
Step Call)
Set how the system routes an Intercom call
to a busy Department Group member.
Intercom callers to the extension can either
hear busy or route to the first available
department number. This only occurs for
calls to the extension directly, not the
department number assigned in Program 11-
07.
04
Hunting Mode
Set the action taken when a call reaches the
last extension in the Department Group (0 =
hunting stopped, 1 = hunting repeats with
circular routing through the Department
Group).
SV9100 Programming Manual

Program 16 : Department Group Setup

16-01 : Department Group Basic Data Setup

Item
Maximum 12 characters
0 = Normal Routing (Priority)
1 = Easy – UCD Routing (Circular)
0 = Normal (Intercom caller to busy
1 = Circular (Intercom callers to
0 = Last extension is called and
1 = Circular
Program:
Input Data
department member hears
busy)
busy department member
routes to idle member)
hunting is stopped
16
1~64
Related
Default
Program
No 11-07
setting
0 16-02
0 16-02
0
2-241