NEC univerge SV9100 Programming Manual page 808

Input Data (Continued)
Item
No.
13 E.164 Incoming/Outgoing via SIP
Trunk URI
When making an incoming or
outgoing call via SIP trunk, enable or
disable conversion of SIP-URI to from
E.164 format (E.g. +850XXXX) for
PSTN. When making an outgoing call
at SIP trunk, add '+' and International
Access Code set in PRG 10-02-02 to
SIP-URI. When making an incoming
call at SIP trunk, delete '+' and
International Access Code when
matching PRG 10-02-02 to SIP-URI.
15 100rel Settings
16 SIP Trunk SIP-URI E.164 Incoming
Mode
2-768
Item
0 = Off
1 = Mode 1
2 = Mode 2
3 = Mode 3
0 = Use default settings
1 = Use opposite settings
Outbound Call:
When set to 0 the 101rel is
included in the supported
header of the invite
message.
When set to 1 the 101rel is
NOT included in the
supported header of the
invite message
Inbound Call:
When set to 0 and the Invite
includes a 101rel in the
supported header of the
invite message the
provisional 1XX (excluding
the 100 Trying) Will contain
a 100rel in the supported
header (which means the
other side must PRACK this
message).
When set to 1 and the Invite
includes a 101rel in the
supported header of the
invite message the
provisional 1XX (excluding
the 100 Trying) Will NOT
contain a 100rel in the
supported header (which
means NO PRACK
required).
0 = Off
1 = Mode 1
2 = Mode 2
Input Data
0
Program 84 : Hardware Setup for VoIP
Issue 4.0
Default Profile 1~6
0
0
(Normal)