NEC univerge SV9100 Programming Manual page 591

Issue 4.0
Item
No.
03 Additional Data
For the Service Type selected in 44-02-02, enter the
additional data required.
1: Delete Digit = 0~255

(255 = Delete All Digits)
2: [Program 44-01 : 0]

ARS/F-Route Table Number = 0~500
(0 = No Setting)
Refer to Program 44-05.
[Program 44-01 : 1]
ARS/F-Route Select Table Number = 0~500
(0 = No Setting)
Refer to Program 44-04.
3: Dial Extension Analyze Table Number = 0~4

(0 = No Setting)
Refer to Program 44-03.
04 Dial Tone Simulation
Enable to send dial tone to the calling party after the
routing is determined. This may be required if the
central office at the destination does not send dial
tone.
Conditions
None
Feature Cross Reference

Automatic Route Selection (ARS)
SV9100 Programming Manual
Item Input Data
1 = Delete Digit = 0~255 (255 :
Delete All Digits)
2 = 0~500
(0 = No Setting)
3 = Dial Extension Analyze
Table Number = 0~4
(0 = No Setting)
0 = Off
1 = On
Default
0
0
2-551