Level:
IN
Description
Use Program 51-15: Demonstration Setting to automatically set the minimum setting values in
NetLink. A system reset occurs after this command is executed.
This program is available only via telephone programming and not through PC
Programming.
IMPORTANT
Input Data
Menu Number
Conditions
None
Feature Cross Reference
None
2-666
Program 51 : NetLink Service
51-15 : Demonstration Setting
1 = Primary automatic setting
2 = Secondary 1 - automatic operation setting
3 = Secondary 2 - automatic operation setting
4 = Secondary 3 - automatic operation setting
Issue 4.0
Program 51 : NetLink Service