Pva Data Setting - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 84-06 : PVA Data Setting to set up threshold levels of every CD-PVAA slot.
Input Data
Slot Number
Item
Item
No.
01
RTP Port Number
02
RTCP Port Number
04 Fract Lost Threshold
05
Packets Lost Threshold
07
Jitter Threshold
09
Delay LSR Threshold
16
IMCP Redirect
Conditions
System programming must be exited before these program options take affect.
Feature Cross Reference

Voice Over Internet Protocol (VoIP)
SV9100 Programming Manual
Program 84 : Hardware Setup for VoIP
Input Data
0~65534
RTP Port Number + 1
0~100%
0~16777215
0~4294967295 (sec)
0~4294967295 (sec)
0=No
1=Yes

84-06 : PVA Data Setting

01~24
Default Description
10020
10021
It has to be RTP Port Number + 1.
0 The data is sent to the GCD-CP10 if the
value exceeds the defined value.
0
The data is sent to the GCD-CP10 if the
value exceeds the defined value.
0
The data is sent to the GCD-CP10 if the
value exceeds the defined value.
0
The data is sent to the GCD-CP10 if the
value exceeds the defined value.
0
The VOIP blade supports sending the
Internet Message Control Protocol
(IMCP) redirect message.
2-755