Mobile Extension Setup - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use Program 15-22 : Mobile Extension Setup to set the system information for the Mobile Extension
feature.
Input Data
Extension Number
Item
No.
01 Mobile Extension Target Setup
Set which Speed Dial bin is used
to call when the Mobile extension
is called.
02
Connect Confirmation
Select when a confirmation (dial )
is required to allow the call to cut
over to the called mobile number.
03
Trunk Access Code
Select if the Normal or Individual
Trunk access is used when
making the call to the mobile
number.
04 Call Back
Set up the Call Back for each
Mobile extension number.
SV9100 Programming Manual
Program 15 : Extension, Basic Setup
Item
0~9999 (0 = No setting/1~9999 = target of mobile extension)
0 = Always
1 = On Analog Line
2 = Never
0 = Use normal trunk access code (11-09-01)
1 = Use individual trunk access code (11-09-02)
0 = Disable
1 = Enable

15-22 : Mobile Extension Setup

001 ~ 960
Input Data Default
0
0
0
0
2-231