Trunk Control - NEC univerge SV9100 Programming Manual

Level:
SA
Description
Use Program 90-06 : Trunk Control for trunk maintenance. Busy Out lets you block a blade from
placing outgoing calls (just like placing the blade switch down). Once busied out, none of the ports on the
blade can be used for new calls. Existing calls, however, are not affected.
This program is available via telephone programming and WebPro but not through PC
Programming.
NOTE
Input Data
Menu Number
Item
Item
No.
01

Trunk Control

Conditions
None
Feature Cross Reference
None
2-820
Program 90 : Maintenance Program
0 = Set Busy Out
1 = Reset Busy Out (idle)
Input Data
Trunk Port Number: 001~400
90-06 : Trunk Control
Program 90 : Maintenance Program
Issue 4.0