Pms Service Setting - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 42-06 : PMS Service Setting to set the PMS integration settings when using PMS-U10
and PMS feature.
Input Data
Item
No.
01 PMS Port Number
A system restart is required when changing this
program for the change to take affect.
02 3:00 AM Auto Room Scan
Set maid required status for all checked-in rooms at
3:00 AM.
03 CheckIn Message Type
04 CheckOut Auto Status Change
05 AREYUTHERE/LINETEST Send Timing
06 AREYUTHERE/LINETEST Send Count
07 Check-out Auto Flexible Status Change
When PRG42-06-07 and PRG42-06-04 are both
enabled, the status programmed in PRG42-06-08 is set
upon checkout regardless of the previous room status.
08
Status for Check-out Auto Flexible Status Change
When PRG42-06-07 is enabled the status programmed
in 42-06-08 is set upon checkout.
2-544
Program 42 : Hotel Setup
Item

42-06 : PMS Service Setting

Input Data
0~65535
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
1~128 (sec)
0~20 (times)
0 = Disable
1 = Enable
1 = Room Clean (Occupied)
2 = Maid Required
3 = Maid in Room
4 = Inspection Required
5 = Maintenance Request
6 = Out of order
7 = Reserve 1
8 = Reserve 2
9 = Reserve 3
0 = Room Clean (Vacant)
Issue 4.0
Default
5129
0
0
0
10
3
0
4
Program 42 : Hotel Setup