NEC univerge SV9100 Programming Manual page 244

Item
Item
No.
48
Subscribe
Expire Timer
for NAT
49
Receiving SIP
INFO
50
Peer to Peer
Mode
51
Transport
Protocol
Conditions
15-05-04 – Nickname must be unique in the system.

Feature Cross Reference
None
2-204
Input Data
0 = Disable
60 ~ 65535(sec)
0 = Disable
1 = Allowed any time
2 = Allowed while RTP is
not available
Off = Disable
On = Enable
0 = UDP
1 = TCP
Default Description
180
On a per station basis, this
setting defines the SIP
Subscribe expiry timer. If this
value is set to 0, for a NAPT
terminal, the value in PRG
84-23-02 is applied.
Note: Version 9000 or higher
is required.
1
Select whether or not
system can receive DTMF
from standard SIP phone via
SIP INFO message. There
are two receive types.
1='Allowed any time' can
receive a SIP INFO
message from a standard
SIP phone as a dial
information any time.
'2=Allowed while RTP is not
available' can receive a SIP
INFO message before
establishing RTP
connection.
1
On a per station basis
enable or disable Peer to
Peer mode.
0
This program shows the
transport protocol for
selected SIP terminal.
Read Only.
Program 15 : Extension, Basic Setup
Issue 4.0
Related
Program
10-46-14