NEC univerge SV9100 Programming Manual page 642

Item
No.
03
Default Mailbox Category
(Default MB Ctg)
Specify the category of mailbox used as the Default
Mailbox. VM8000 InMail mailbox categories are
Subscriber Mailbox, Master Mailbox, and Routing
Mailbox. VM8000 InMail uses the Default Mailbox when
an Answer Schedule is not in effect.
VM8000 InMail handles the routing according to the type
of mailbox (Subscriber, Call Routing, or Announcement)
within the specified category:
If the Default Mailbox is a Subscriber Mailbox, the

outside caller hears the mailbox greeting (if
recorded) and can leave a message.
If the Default Mailbox is an Announcement Mailbox,

the outside caller hears the recorded
announcement. Depending on how the
Announcement Mailbox is programmed, VM8000
InMail then hangs up, reroutes the call, or provides
additional dialing options.
If the Default Mailbox is a Call Routing Mailbox, the

outside caller hears the instruction menu and can
dial any option allowed by the associated Dial Action
Table.
If any of the Input Data values are entered, the

terminal displays the Override Mailbox Number
selection (below).
Default Mailbox Number
(Default MB Num)
Set the Answer Table Default Mailbox number. VM8000
InMail uses the Default Mailbox when an Answer
Schedule is not in effect. By default, this occurs at all
times other than Monday through Friday from 8:30 AM to
5:00 PM.
04
Next Answer Table
When 10 Answer Schedules in an Answer Table are not
sufficient, link two Answer Tables together. VM8000
InMail treats the two linked tables as a single 20 entry
Answer Table.
2-602
Item Input Data
0 = Undefined)
1 = Subscriber Mailbox (STA)
2 = Group Mailbox
3 = Routing Mailbox
Digits
(Three maximum, using 0~9)
Answer Table (1~16)
0 = Undefined
Issue 4.0
Default
Answer Table 1 = 3
Answer Table 2~16 = 0
Answer Table 1 = 1
Answer Table
2~16 = No Entry
0
Program 47 : InMail