Incoming Virtual Extension Ring Tone Setup - NEC univerge SV9100 Programming Manual

15-08 : Incoming Virtual Extension Ring Tone Setup

Level:
IN
Description
Use Program 15-08 : Incoming Virtual Extension Ring Tone Setup to assign a ring tone range (0~4)
to incoming virtual extensions assigned to a Virtual Extension key (Program 15-07). If you enable ringing
for the key in Program 15-09, the key rings with the tone you set in this program. Also see Program 22-
03. The chart below shows the available tones. There are 512 available extension ports.
Input Data
Extension Number
Item
Incoming Ring Pattern
No.
01 0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Ring Tone
Extension
5 = Tone Pattern 5
6 = Tone Pattern 6
7 = Tone Pattern 7
8 = Tone Pattern 8
2-216
Program 15 : Extension, Basic Setup
Default
0 = Tone Pattern 1
001 ~ 960
Description
When an extension or a virtual extension
is assigned to the function key on the
key telephone, select the ring tone when
receiving a call on that key.
For CAR keys, only tone pattern 1 (entry
0) can be used. The remaining patterns
are not checked with this feature.
Program 15 : Extension, Basic Setup
Issue 4.0