Account Code Setup - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use
Program 35-05 : Account Code Setup
Service. Assign a Class of Service to extensions in Program 20-06.
Input Data
Class of Service Number
Item
No.
01
Account Code Mode
Select the Account Code Mode (0~3).
02 Forced Account Code Toll Call
Setup
Enable Account Codes for all calls or
just toll calls (for mode 2 or 3 in Item
01 above).
03 Account Codes for Incoming Calls
Allow users to enter Account Codes
for incoming calls. If disabled, any
code entered dials out on the
connected trunk.
04 Hiding Account Codes
Hide or show the Account codes on a
telephone display.
2-492
Program 35 : SMDR Account Code Setup
to set various Account Code options for an extension Class of
Item
0 = Account Codes Disabled (None)
1 = Account Codes optional
2 = Account Codes Required but not
3 = Account Codes Required and
0 = Account Codes for toll and local calls
1 = Account Codes just for toll calls
0 = Account Codes for incoming calls
1 = Account Codes for incoming calls
0 = Account Codes not displayed
1 = Account Codes displayed

35-05 : Account Code Setup

01~15
Input Data
verified (No verify)
Verified (Verify)
All)
(STD)
disabled (No)
enabled (Yes)
Program 35 : SMDR Account Code Setup
Issue 4.0
Default
0
0
0
1