Call Routing Mailbox Options - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use

47-08 : Call Routing Mailbox Options

Mailboxes in 47-07-02: Routing Mailbox Type.
Input Data
Routing Mailbox Number
Item
No.
01 Dial Action Table
Assign the Dial Action Table to the Call Routing
Mailbox. The Dial Action Table defines the dialing
options for the call Routing Mailbox.
02
Screened Transfer Timeout
(Scrn Trf Timeout)
Set the time a Screened Transfer (TRF) from the
Automated Attendant rings an unanswered extension
before recalling.
This option has a similar function as Customize:
Mailbox Options: Call Routing: [Call Handling] Options:
Delay Rings Before Redirect Transfer in SV8100
InMail.
03 Time Limit for Dialing Commands
(Dialing Timeout)
Determine the time SV8100 InMail waits for an
Automated Attendant caller to dial before routing the
call to the Timeout destination.
Be sure your Dial Action Tables have a Timeout action
programmed.
If the caller waits too long to dial:
When the associated Dial Action Table has a Timeout
action programmed, the caller routes to that
destination.
When the associated Dial Action Table does not have
a Timeout action programmed, the Instruction Menu
repeats three times and then SV8100 InMail hangs up.
SV9100 Programming Manual
47-08 : Call Routing Mailbox Options
to set the options for mailboxes assigned as Call Routing
Item
Program 47 : InMail
1~32
Input Data
1~32
(Dial Action Table 1~32)
0~255 (sec)
Entering 0 causes
immediate recall.
0~99 (sec)
Entering 0 causes the
Automated Attendant to
immediately route callers
to the Timeout destination
programmed in the active
Dial Action Table.
Default
1 (Dial Action Table 1)
15
5
2-593