Program 45 : Voice Mail Integration; Voice Mail Integration Options - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use
Program 45-01 : Voice Mail Integration Options
Input Data
Item
No.
01 Voice Mail Department Group Number
Assign Extension (Department) Group number as
the voice mail group.
02
Voice Mail Master Name
Enter the Voice Mail Master Name.
03 Voice Mail Call Screening
Enable/Disable the ability to process the Call
Screening commands (1+ extension number) sent
from the Voice Mail. You should normally enable this
option to allow for Voice Mail Call Screening. Disable
this option if your system has been modified so that
extensions begin with the digit 1 (e.g., 101, 102,
etc.).
04
Park and Page
Enable/Disable the system ability to process the
Voice Mail Park and Page () commands. You
should normally enable this option.
05 Message Wait
Enable/Disable the system ability to process the
Voice Mail Message Wait (
should normally enable this option. If enabled, be
sure that the programmed Message Notification
strings don't contain the code for trunk access.
06 Record Alert Tone Interval Time
Set the time between Voice Mail Conversation
Record alerts.
07 Centralized Voice Mail Pilot Number
Assign this number the same as the extension
number or pilot number.
SV9100 Programming Manual

Program 45 : Voice Mail Integration

45-01 : Voice Mail Integration Options

to customize certain voice mail integration options.
Item
#
) commands. You
Program:
Input Data Default
0~64
0 = No Voice Mail
VOICE
Up to 12 Characters
0 = Off
1 = On
0 = Off
1 = On
0 = Off
1 = On
0~64800 (sec)
Dial (up to eight No Setting
digits)
45
0
MAIL
0
1
1
30
2-565