Remote Conference Group Setting - NEC univerge SV9100 Programming Manual

Level:
IN
Description
Use Program 20-34: Remote Conference Group Setting to configure Remote Conference
parameters.
Input Data
Item
No.
01 Remote Conference - Name
Set name for remote conference.
02
Remote Conference - Password
Set password for remote conference.
03 Remote Conference - Maximum
Participants
Set the maximum number of allowed
participants for each conference.
04 Remote Conference - Maximum
Conference Duration
Set the time limit (in seconds) for
each conference.
05
Remote Conference - Ending
Conference Alert Tone Time
Set the time for the conference end
time alert tone to be played.
06
Remote Conference - Password
Mode
Set whether users are prompted to
enter a password to access the
conference. Normal will prompt users
to enter a password. If set to Skip no
password is required to enter a
conference.
07 MCU Mode for Remote Conference
Set the MCU video mode for remote
conference. Mode 1 = CIF (352x288)
Mode 2 = VGA (640x480)
2-302
Program 20 : System Option Setup

20-34 : Remote Conference Group Setting

Item
Up to 12 characters.
Up to 4 numbers.
0 ~ 32
0 ~ 64800sec
0 ~ 64800sec
0 = Normal
1 = Skip
0 = Disable
1 = Mode 1
2 = Mode 2
Input Data
Default for conferences 1~4 = Conf 1-Conf 4
Default for conferences 5~20 = blank
Default for conferences 1~4 = 1111
Default for conferences 5 ~20 = blank
Default for conferences 1~4 = 8
Default for conferences 5 ~20 = 0
Issue 4.0
Default
7200
300
0
0
Program 20 : System Option Setup