Did Trunk Group To Translation Table Assignment - NEC univerge SV9100 Programming Manual

22-13 : DID Trunk Group to Translation Table Assignment

Level:
IN
Description
Use
Program 22-13 : DID Trunk Group to Translation Table Assignment
DID Translation Tables. DID trunks should be in their own group. If you have more than one type of DID
trunk, put each type in a separate Trunk Group. For each Trunk Group, you make a Translation Table
entry for each Night Service mode.
Input Data
Trunk Group Number
Item
Day/Night Mode
No.
01 1~8
Conditions
None
Feature Cross Reference

Direct Inward Dialing (DID)
2-380
Program 22 : Incoming Call Setup
Conversion Table
Default
Area Number
0~20
0 = No Setting
to assign the DID Trunk Groups to
1~100
1
Program 22 : Incoming Call Setup
Issue 4.0