NEC univerge SV9100 Programming Manual page 654

Hide thumbs Also See for univerge SV9100:
Table of Contents

Advertisement

Dial Action Table Actions
TRF Action - Screened Transfer (1) (TRF)
Use this action to allow an Automated Attendant caller to place a Screened Transfer to an
extension. After an Automated Attendant caller dials an extension, VM8000 InMail calls (screens)
the destination to see if the transfer can go through.
If the destination is available, the Automated Attendant rings it. If the destination answers, the call
goes through.
If the destination does not answer during a preset interval, is busy, or is in Do Not Disturb, the
Automated Attendant does not extend the call. It then provides the caller with additional options.
Number Option
Normally, the corresponding Number option should be XXX. Note that the key you choose for this
action is the first digit of the called extension number.
For example, to allow callers to place Screened Transfers to extensions 301~399, for key 3
enter TRF for the Action and XXX for the corresponding Number.
To have Screened Transfer call a specific extension, the corresponding Number option should be
that extension number. The caller then dials that single digit to reach the extension.
For example, to have callers dial 8 to reach extension 303, for key 8 enter TRF for the Action
and 303 for the corresponding Number.
UTRF Action – Unscreened Transfer (2) (UTRF)
Use this action to allow an Automated Attendant caller to place an Unscreened Transfer to an
extension. This is similar to telephone system unscreened transfers in which the transferring party
immediately extends the call. After an Automated Attendant caller dials an extension, VM8000
InMail transfers the call to the destination and hangs up. Any recalls or additional routing are
handled by the telephone system – just as with any other unscreened transfer.
Number Option
Normally, the corresponding Number option should be XXX. Note that the key you choose for this
action is the first digit of the called extension number.
For example, to allow callers to place Unscreened Transfers to extensions 301~399, for key 3
enter UTRF for the Action and XXX for the corresponding Number.
2-614
Issue 4.0
Program 47 : InMail

Advertisement

Table of Contents
loading

Table of Contents