Ars/F-Route Table - NEC univerge SV9100 Programming Manual

Issue 4.0
Level:
IN
Description
Use
Program 44-05 : ARS/F-Route Table
the higher priority trunk groups are busy, the next order group is used. If a lower priority route is selected,
the caller may be notified with a beep tone.
Input Data
ARS/F-Route Table Number
Priority Number
Item
No.
01
Trunk Group Number
Select the trunk group number to use for the
outgoing ARS call.
02 Delete Digits
Enter the number of digits to be deleted from the
dialed number.
03 Additional Dial Number Table
Enter the table number (defined in Program 44-06)
for additional digits to be dialed.
04 Beep Tone
Select whether or not a beep is heard if a lower
priority trunk group is used to dial out.
05
Gain Table Number for Internal Calls
Select the gain table number to use for the internal
call (defined in Program 44-07).
06
Gain Table Number for Tandem Connections
Select the gain table number to use for the tandem
call (defined in Program 44-07).
SV9100 Programming Manual
Program 44 : ARS/F-Route Setup
to set the ARS/F-Route table. There are four kinds of order. If
Item

44-05 : ARS/F-Route Table

1~500
1~4
Input Data
0~100, 101~150 (100+ Networking ID), 255
0 = No Setting
1~100 = Trunk Group from PRG 14-05
101~150 = Networking
255 = Extension Call
0~255
(255 = Delete All)
0~1000
0 = Off
1 = On
0~500
0 = No Setting
0~500
0 = No Setting
Default
0
0
0
0
0
0
2-555