Issue 4.0
Level:
IN
Description
Use Program 31-06 : External Speaker Control to define the settings for the external speaker using an
amplifier.
Input Data
External Speaker Number
Item
No.
01
Broadcast Splash Tone Before
Paging (Paging Start Tone)
Enable/Disable splash tone before
Paging over an external zone. If
enabled, the system broadcasts a
splash tone before the External
Paging announcement.
02
Broadcast Splash Tone After
Paging (Paging End Time)
Enable/Disable splash tone after
Paging over an external zone. If
enabled, the system broadcasts a
splash tone at the end of an External
Paging announcement.
03
Speech Path
Determine if the external speaker is
used for talkback (As this option is
not available with the GCD-CP10
external page zone, speaker 9 should
be left at 1).
04
CODEC Transmit Gain Setup
05
CODEC Receive Gain Setup
SV9100 Programming Manual
Item
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
0 = No Tone (None)
1 = Splash Tone
2 = Chime Tone
0 = Both Way (Duplex)
1 = One Way (PGD(2)-U10 ADP SPK)
(Simplex)
1~57 (-15.5 ~ +12.5dB)
1~57 (-15.5 ~ +12.5dB)
Program 31 : Paging Setup
31-06 : External Speaker Control
1~9
Input Data
Default
2
2
1
32
32
2-463