NEC univerge SV9100 Programming Manual page 51

Issue 4.0
Item
No
19 Numbering Plan Identification
ISDN Protocol definition
23 Straight/Cross Wiring
24
--- Not Used ---
25
Layer 1 Supervision
When set to 0, Layer 1 deactivation is
not considered to be a fault, so the
channel can be usable and alarm #10
not issued. When set to 1, Layer 1
deactivation is considered to be a fault,
so the channel will be skipped and
alarm #10 issued.
For PRTA PKG Setup
Input Data
ISDN Line Number
Item
No.
01 ISDN Line Mode
02 Logical Port Number
 The start port number of a
PRI line is displayed.
SV9100 Programming Manual
Item
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard numbering plan
5 = Private numbering plan
0 = Auto
1 = Manual (Cross)
2 = Manual (Straight)
0 = Disable
1 = Enable
Item
0 = Not Used
1 = T-Point
2 = S-Point (Not used)
3 = NW Mode (Leased Line)
4 = NW Mode (Interconnected Line)
5 = NW Mode (Interconnected Line,
6 = S-Point (Leased Line) (Not used)
0 = Not used
1 = T-Point (1~400)
2 = S-Point (1~960) (Not used)
3 = NW Mode (Leased Line) (1~256)
4 = NW Mode (Interconnected Line)
5 = NW Mode (Interconnected Line,
6 = S-Point (Leased Line) (Not used)
Input Data
01~24
Input Data
Fixed Layer1 = NT)
(1~256)
Fixed Layer1 = NT) (1~256)
Default
1
0
0
Default
1
0
2-11