ABB ACS800 Firmware Manual page 137

Name Description
Referencing EXT2
Selecting the source for the speed/ torque reference (If
unipolar)
Selecting the source for the speed / torque reference (If
Bipolar)
(If AI1 is used: Setting analogue input AI1 limits, scale,
inversion)
Setting the reference limits
Setting the speed (frequency) limits
Setting the Slowdown reference
Setting acceleration and deceleration times
Setting Joystick Warning delay
Set parameters
11.06
11.06
(13.01, 13.02, 13.03,
13.04, 13.05, 30.01)
11.07
11.08
20.02, 20.01, (20.08,
20.07)
11.12
22.02, 22.03, 22.10
11.13
Application macros, control location EXT1/EXT2
137
Parameter value
AI1/JOYSTICK
AI1 BIPOLAR
2 seconds