Adaptive Program - ABB ACS800 Firmware Manual

212
Index Name/Selection
83.05 PASSCODE
0 ...
84 ADAPTIVE
PROGRAM
84.01 STATUS
84.02 FAULTED PAR
84.05 BLOCK1
ABS
ADD
AND
BITWISE
COMPARE
COUNT
DPOT
EVENT
FILTER
MASK-SET
MAX
MIN
MULDIV
NO
OR
PI
PI-BAL
PI BIPOLAR
RAMP
SR
SWITCH-B
SWITCH-I
Actual signals and parameters
Description
Sets the passcode for the Adaptive Program protection. The passcode is
needed at activation and inactivation of the protection. See parameter 83.02.
Passcode. The setting restores to 0 after the protection is activated/inactivated.
Note: When activating, write down the passcode and store it in a safe place.
- selections of the function blocks and their input connections.
- diagnostics
For more information, see the Adaptive Program Application Guide
[3AFE64527274 (English)].
Shows the value of the Adaptive Program status word. The table below shows
the alternative bit states and the corresponding values on the panel display.
Bit Display Meaning
0 1 Stopped
1 2 Running
2 4 Faulted
3 8 Editing
4 10 Checking
5 20 Pushing
6 40 Popping
8 100 Initialising
Points out the faulted parameter in the Adaptive Program.
Selects the function block for Block Parameter Set 1. See the Adaptive
Program Application Guide [3AFE64527274 (English)].
FbEq
-
11
10
2
26
16
21
23
20
13
24
17
18
12
1
3
14
15
25
22
5
7
19