Settings; Diagnostics - ABB ACS800 Firmware Manual

84

Settings

Parameter
35.01
98.12
Other
Parameters
are not effective.
At the motor end, the cable shield should be earthed through a 10 nF capacitor. If this is not possible,
the shield is to be left unconnected.

Diagnostics

Actual signal
01.35
Warnings
MOTOR 1 TEMP
T MEAS ALM
Faults
MOTOR 1 TEMP
Program features
Additional information
... 35.03 Settings of motor 1 temperature measurement
Activation of optional analogue I/O for motor temperature measurement
13.16 to 13.20 (AI1 processing) and
Additional information
Temperature value
Measured motor temperature has exceeded the set alarm limit
Motor temperature measurement is out of acceptable range
Measured motor temperature has exceeded the set fault limit
96.01 to 96.05 (AO1 signal selection and processing)