ABB ACS800 Firmware Manual page 155

No. Name/Value
03.16 ALARM WORD 4
03.17 FAULT WORD 5
03.18 ALARM WORD 5
03.19 INT INIT FAULT
03.20 LATEST FAULT
03.21 2.LATEST FAULT
03.22 3.LATEST FAULT
03.23 4.LATEST FAULT
03.24 5.LATEST FAULT
03.25 LATEST WARNING
03.26 2.LATEST WARNING
03.27 3.LATEST WARNING
03.28 4.LATEST WARNING
03.29 5.LATEST WARNING
03.30 LIMIT WORD INV
03.31 ALARM WORD 6
03.32 CRANE STATUS WORD A 16-bit data word. See section
03.33 CRANE FAULT WORD
03.34 APPL CONTROL
WORD
03.35 SPEED CORR BUF
03.36 M F STATUS WORD
03.37 FLW CMD WITH POS
03.38 POSITION REM
Description
A 16-bit data word. See section
Fieldbus control.
A 16-bit data word. See section
Fieldbus control.
A 16-bit data word. See section
Fieldbus control.
A 16-bit data word. See section
Fieldbus control.
Fieldbus code of the latest fault. See section
chapter Fieldbus control.
Fieldbus code of the 2nd latest fault. See section
codes in chapter Fieldbus
Fieldbus code of the 3rd latest fault. See section
codes in chapter Fieldbus
Fieldbus code of the 4th latest fault. See section
codes in chapter Fieldbus
Fieldbus code of the 5th latest fault. See section
codes in chapter Fieldbus
Fieldbus code of the latest warning. See section
codes in chapter Fieldbus
Fieldbus code of the 2nd latest warning. See section
Warning codes in chapter
Fieldbus code of the 3rd latest warning. See section
Warning codes in chapter
Fieldbus code of the 4th latest warning. See section
Warning codes in chapter
Fieldbus code of the 5th latest warning. See section
Warning codes in chapter
A 16-bit data word. See section
Fieldbus control.
A 16-bit data word. See section
Fieldbus control.
chapter Fieldbus control.
A 16-bit data word. See section
Fieldbus control.
A 16-bit data word. See section
chapter Fieldbus control.
A real value which shows the speed correction value in rpm that is used
in speed control loop.
A 16-bit data word. See section
Fieldbus control.
A 16-bit data word. See section
Fieldbus control.
An integer word which is used for transmission of Master position
remainder, when the drive is in Shaft synchro mode. See section
location EXT1/EXT2 supervision mismatch
03.16 ALARM WORD 4
03.17 FAULT WORD 5
03.18 ALARM WORD 5
03.19 INT INIT FAULT
03.20...03.24 Fault codes
03.20...03.24 Fault
control.
03.20...03.24 Fault
control.
03.20...03.24 Fault
control.
03.20...03.24 Fault
control.
03.25...03.29 Warning
control.
Fieldbus control.
Fieldbus control.
Fieldbus control.
Fieldbus control.
03.30 LIMIT WORD INV
03.31 ALARM WORD 6
03.32 CRANE STATUS WORD
03.33 CRANE FAULT WORD
03.34 APPL CONTROL WORD
03.36 M F STATUS WORD
03.37 FCW WITH POS
for more explanation.
FbEq
in chapter
in chapter
in chapter
in chapter
in
03.25...03.29
03.25...03.29
03.25...03.29
03.25...03.29
in chapter
in chapter
in
in chapter
in
in chapter
in chapter
Control
Actual signals and parameters
155