ABB ACS800 Firmware Manual page 271

Code Description
FF51 LINE CONV
FFF0 MOTOROVER SPD
FF56 MOTOR PHASE
4310 MOTOR TEMP
4312 MOTOR 1 TEMP
4313 MOTOR 2 TEMP
FF52 NO MOT DATA
2310 OVERCURR xx
2310 OVERCURRENT
7123 OVERFREQ
FF55 OVER SWFREQ
5300 PANEL LOSS
6320 PARAM CRC
3381 POWERFAIL
3381 POWERF INV xx
5210 PPCC LINK
5210 PPCC LINK xx
5482 PP OVERLOAD
FF54 RUN DISABLED
FF7D SAFETYCLS FLT
FFF1 SPD MATCH FLT
2340 SC INV xx y
2340 SHORT CIRC
FF8A SLOT OVERLAP
FF7A START INHIBI
3130 SUPPLY PHASE
FFBE SYNC FAULT
4380 TEMP DIF xx y
FF50 THERMAL MODE
4311 THERMISTOR
FFF2 TORQ PROVE FLT
FF6A UNDERLOAD
Application/Fault Word Status Bit
03.06 FAULT WORD 2 bit 15
03.05 FAULT WORD 1 bit 6
03.15 FAULT WORD 4 bit 1
03.15 FAULT WORD 4 bit 2
03.06 FAULT WORD 2 bit 1
03.05 FAULT WORD 1 bit 1 and
03.05 FAULT WORD 1 bit 1
03.05 FAULT WORD 1 bit 9
03.06 FAULT WORD 2 bit 9
03.06 FAULT WORD 2 bit 13
03.17 FAULT WORD 5 bit 9
03.17 FAULT WORD 5 bit 9 and
03.06 FAULT WORD 2 bit 11
03.06 FAULT WORD 2 bit 11 and
INFO
03.17 FAULT WORD 5 bit 6
03.33 CRANE FAULT WORD
03.05 FAULT WORD 1 bit 0,
and 04.02 INT SC INFO
03.05 FAULT WORD 1 bit 0 and
03.03 AUXILIARY STATUS WORD
03.06 FAULT WORD 2 bit 0
03.33 CRANE FAULT WORD
03.17 FAULT WORD 5 bit 8 and
03.05 FAULT WORD 1 bit 5
03.05 FAULT WORD 1 bit 8
04.01 FAULTED INT INFO
04.01 FAULTED INT INFO
04.01 FAULTED INT
bit 1
04.01 FAULTED INT INFO
04.01 FAULTED INT INFO
bit 8
bit 4
04.01 FAULTED INT INFO
Fieldbus control
271