Auxiliary Status Word 3; Auxiliary Status Word 4; Fault Word 4 - ABB ACS800 Firmware Manual

03.13 AUXILIARY STATUS WORD 3

Bit Name
0 REVERSED
1 EXT CTRL
2 REF 2 SEL
3 STEP REF
4 STARTED
5 USER 2 SEL
6 OPEN BRAKE
7 LOSS OF REF
8 STOP DI STATUS
9 READY
10 DATASET STATUS
11 MACRO CHG
12...15 Reserved

03.14 AUXILIARY STATUS WORD 4

Bit Name
0 ... 6 Unused
7 ... 9 Reserved
10 EXT SPD MAX LIMIT
11 EXT SPD MIN LIMIT

03.15 FAULT WORD 4

Bit Name
0 Reserved
1 MOTOR 1 TEMP
2 MOTOR 2 TEMP
3 BRAKE ACKN
4 ... 15 Reserved
Description
Motor rotates in reverse direction.
External control is selected.
Reference 2 is selected.
A Step reference (1 ... 4) is selected.
The drive has received a Start command.
User Macro 2 has been loaded.
The Open brake command is ON. See group
CONTROL.
The reference has been lost.
The state of the interlock input on the RMIO board.
Ready to function: Run enable signal on, no fault
Data set has not been updated.
Macro is changing or is being saved.
Description
Speed is limited in the forward direction according to the
value set in par 20.22.
Speed is limited in the reverse direction according to the
value set in par 20.23.
Description
For the possible causes and remedies, see chapter
tracing.
267
42 BRAKE
Fault
Fieldbus control