ABB ACS800 Firmware Manual page 222

222
Index Name/Selection
98.05 DI/O EXT MODULE 3 Activates the communication to the digital I/O extension module 3 (optional)
NO
RDIO-SLOT1
RDIO-SLOT2
RDIO-DDCS
98.06 AI/O EXT MODULE
NO
RAIO-SLOT1
RAIO-SLOT2
RAIO-DDCS
98.07 COMM PROFILE
ABB DRIVES
GENERIC
CSA 2.8/3.0
Actual signals and parameters
Description
and defines the type and connection interface of the module.
Module outputs: See parameters
that are indicated through the relay outputs.
Inactive
Communication active. Module type: RDIO. Connection interface: Option slot 1
of the drive.
Communication active. Module type: RDIO. Connection interface: Option slot 2
of the drive.
Communication active. Module type: RDIO. Connection interface: Optional I/O
module adapter (AIMA) that communicates with the drive through a fibre optic
DDCS link.
Note: Module node number must be set to 4. For directions, see RDIO Module
User's Manual [3AFE64485733 (English)].
Activates the communication to the analogue I/O extension module (optional),
and defines the type and connection interface of the module.
Module inputs:
- Values AI5 and AI6 in the drive application program are connected to module
inputs 1 and 2.
- See parameters 98.13 and
Module outputs:
- See parameters 96.01 and
indicated through module outputs 1 and 2.
Communication inactive
Communication active. Module type: RAIO. Connection interface: Option Slot 1
of the drive.
Communication active. Module type: RAIO. Connection interface: Option Slot 2
of the drive.
Communication active. Module type: RAIO. Connection interface: Optional I/O
module adapter (AIMA) that communicates with the drive through a fibre optic
DDCS link.
Note: Module node number must be set to 5. For directions, see RAIO Module
User's Manual [3AFE64484567 (English)].
Defines the profile on which the communication with the fieldbus or another
drive is based. Visible only when fieldbus communication is activated with
parameter 98.02.
ABB Drives profile
Generic drive profile. Typically used with the fieldbus modules that have the
type designation of form Rxxx (installed in the option slot of the drive).
Communication profile used by application program versions 2.8 and 3.0.
14.14 and 14.15 for selecting the drive states
98.14 for the signal type definitions.
96.06 for selecting the drive signals that are
FbEq
1
2
3
4
1
2
3
4
1
2
3