Relay Outputs - ABB ACS800 Firmware Manual
Crane control program
Hide thumbs
Also See for ACS800:
- Firmware manual (214 pages) ,
- Hardware manual (210 pages) ,
- Cabinet installation and operating instruction (162 pages)
Table of Contents
Advertisement
170
Index
Name/Selection
13.20
INVERT AI5
NO
YES
13.21
MINIMUM AI6
0 mA
4 mA
TUNED VALUE
TUNE
13.22
MAXIMUM AI6
20 mA
TUNED VALUE
TUNE
13.23
SCALE AI6
0 ... 1000%
13.24
FILTER AI6
0.00 ... 10.00 s
13.25
INVERT AI6
NO
YES
14 RELAY OUTPUTS
14.01
RO PTR1
-255.255.31 ...
+255.255.31 / C.-
32768 ... C.32767
14.02
RO PTR2
-255.255.31 ...
+255.255.31 / C.-
32768 ... C.32767
14.03
RO PTR3
-255.255.31 ...
+255.255.31 / C.-
32768 ... C.32767
14.10
RO PTR4
-255.255.31 ...
+255.255.31 / C.-
32768 ... C.32767
Actual signals and parameters
Description
See parameter 13.05.
See parameter 13.05.
See parameter 13.05.
See parameter 13.01.
Note: If RAIO-01 is used with voltage input signal, 20 mA corresponds to 10 V.
See parameter 13.01.
See parameter 13.01.
See parameter 13.01.
See parameter 13.01.
See parameter 13.02.
Note: If RAIO-01 is used with voltage input signal, 20 mA corresponds to 10 V.
See parameter 13.02.
See parameter 13.02.
See parameter 13.02.
See parameter 13.03.
See parameter 13.03.
See parameter 13.04.
See parameter 13.04.
See parameter 13.05.
See parameter 13.05.
See parameter 13.05.
Status information indicated through the relay outputs, and the relay operating
delays. See section
Programmable relay outputs
Defines the source or constant for value.
Parameter index or a constant value. See parameter
the difference.
For example, default value +003.013.06 (Par.
brake command.
Defines the source or constant for value.
Parameter index or a constant value. See parameter
the difference.
For example, default value +003.002.02 (Par.
running.
Defines the source or constant for value.
Parameter index or a constant value. See parameter
the difference.
For example, default value -003.002.03 (Par.
drive fault.
Defines the source or constant for value.
Parameter index or a constant value. See parameter
the difference.
on page 64.
10.04
for information on
03.13
bit 6) is used for Open
10.04
for information on
03.02
bit 2) is used for drive
10.04
for information on
03.02
bit 3) is used for inverted
10.04
for information on
FbEq
0
65535
1
2
3
4
1
2
3
0 ... 32767
0 ... 1000
0
65535
-
-
-
-
Advertisement
Table of Contents
