Local Control - ABB ACS800 Firmware Manual

54

Local control

Control panel
DriveWindow
(DDCS)
Local control
Note: When you are using (L) local control, you are responsible for the application
safety. If you are operating with a stand-alone crane and a Master/Follower, and if
the control panel is transferred from the remote mode to the local mode on the
Master or on the Follower, the application protections are not used.
When the drive is in local control, the control commands are given from the control
panel keypad. L indicates local control on the panel display.
1 L ->1242 rpm
The control panel always overrides the external control signal sources when used in
the local control mode.
Program features
ACS800
Standard I/O
Fieldbus
adapter
RTAC/RDIO/RAIO
module
RDCO
module
CH3
External control
Slot 1
Slot 1 or Slot 2
CH0
Fieldbus adapter
Nxxx
(DDCS)
Advant controller
(eg AC 80, AC 800M)
CH1
AIMA-01 I/O
(DDCS)
adapter module
I
or
RTAC/RDIO/RAIO
module