Parameter Mode; How To Select A Parameter And Change The Value - ABB ACS800 Firmware Manual

Parameter mode

In the Parameter Mode, you can:
• view the parameter values
• change the parameter settings.
The panel enters the Parameter Mode when you press the PAR key.

How to select a parameter and change the value

Step Action
1. To enter the Parameter Mode.
2. To select a group.
3. To select a parameter within a group.
4. To enter the parameter setting function.
5. To change the parameter value.
- (slow change for numbers and text)
- (fast change for numbers only)
6a. To save the new value.
6b. To cancel the new setting and keep the original value,
press any of the mode selection keys.
The selected mode is entered.
Press key Display
1 L -> 1242.0 rpm O
10 START/STOP/DIR
PAR
01 EXT1 STRT/STP/DIR
DI1,2
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
01 KEYPAD REF SEL
REF1 (rpm)
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
AI1
1 L -> 1242.0 rpm O
ENTER
11 REFERENCE SELECT
03 EXT REF1 SELECT
[AI1]
1 L -> 1242.0 rpm O
11 REFERENCE SELECT
03 EXT REF1 SELECT
[AI2]
1 L -> 1242.0 rpm O
ENTER
11 REFERENCE SELECT
03 EXT REF1 SELECT
AI2
1 L -> 1242.0 rpm O
ACT PAR
11 REFERENCE SELECT
03 EXT REF1 SELECT
AI1
FUNC DRIVE
45
Control panel