Mitsubishi Electric FR-A820-00046 (0.4K) Instruction Manual page 794

 400 V class
Motor model: SF-V5RUH[]K
Applicable inverter model
FR-A840-[]K (ND rating)
Rated output power (kW)
Rated current (A)
Rated torque (N·m)
Maximum torque at 150% 60 s
(N·m)
Rated speed (r/min)
Maximum speed (r/min)
Frame No.
-4 2
Inertia moment J (×10 kg·m )
*5
Noise
Voltage
Cooling fan
(with
thermal
*3
Input
*7*
protector)
Recommended
8
thermal setting
Surrounding air temperature and
humidity
Structure (Protection rating)
Detector
Equipment
Insulation class
Vibration rank
Approx. mass (kg)
*1 80% output in the high-speed range. (The output is reduced at the speed of 2400 r/min or faster.) Contact us separately for details.
*2 The maximum speed of a 3.7 kW motor or less is 3600 r/min. Consult our sales office for use of these motor.
*3 Power (current) at 50/60 Hz.
*4 Since a brake motor has a window for gap check, the protection rating of both the cooling fan section and brake section of the motor is IP20. The
letter S in IP23S is an additional code indicating that a cooling fan was checked for water protection while it is stationary.
*5 The value shown is applicable to the motor at high carrier frequency (Pr.72 = 6 and Pr.240 = 0).
*6 A separate power supply of 12/24 V is required for the encoder. (When the FR-A8TP is installed on the inverter, the 24 V power supply from the
FR-A8TP is available.)
*7 The cooling fan is equipped with a thermal protector. The cooling fan stops when the coil temperature exceeds the specified value in order to
protect the fan motor. A restrained cooling fan or degraded fan motor insulation could be causes for the rise in coil temperature. The cooling fan
re-starts when the coil temperature drops to normal.
*8 The cooling fan voltage and input values are the basic specifications of the cooling fan alone and free air values. The input value becomes slightly
larger when it is rotated by this motor due to an increased workload, but the cooling fan can be used as it is. When preparing a thermal relay at
the user side, use the recommended thermal setting.
 Motor torque
The torque characteristics of the SF-V5RU series driven by the inverter are shown in graph form as follows.
1 2 3 5
2.2 2.2 3.7 7.5 11
1.5 2.2 3.7 5.5 7.5
4.2 5.8 8.8 14.5 18.5
9.55 14.1 23.6 35.0 47.7
14.3 21.1 35.4 52.4 71.6
90L 100L 112M 132S 132M
67.5 105 175 275 400
75 dB or less
Single-phase 200 V/50 Hz
Single-phase 200 to 230 V/60 Hz
36/55 W 22/28 W
(0.26/0.32 A) (0.11/0.13 A)
0.36 A 0.18 A
-10 to +40°C (non-freezing), 90% RH or less (non-condensing)
Totally enclosed forced ventilated (Motor: IP44, Cooling fan: IP23S)
Encoder 2048P/R, A phase, B phase, Z phase, +12 V/24 VDC power supply
24 33 41 52 62
7 11 15 18 22
15 18.5 22 30
11 15 18.5 22
27.5 35.5 44 51
70.0 95.5 118 140
105 143 176 211
1500
*2
3000
160M 160L 180M 180M
750 875 1725 1875
Three-phase 380 to 400 V/50 Hz
Three-phase 400 to 460V/60Hz
55/71 W
(0.19/0.19 A)
0.25 A
Encoder, thermal protector, fan
F
V10
99 113 138 160
30 37 45 55
37 45 55 75
*1 *1 *1
55
30 37 45
67 84 99 132
191 235 286 350
287 353 429 525
2400
200L 200L 200L 225S
3250 3625 3625 6850
80 dB or less 85 dB or less
100/156 W 85/130 W
(0.27/0.30 A) (0.23/0.26 A)
0.39 A 0.34 A
*4
*6
238 255 255 320
8. SPECIFICATIONS
8.2 Motor rating
1
2
3
4
5
6
7
8
9
10
795