5.8
(F) Setting of acceleration/deceleration time and
acceleration/deceleration pattern
Purpose
To set the motor acceleration/
deceleration time
To set the acceleration/deceleration
pattern suitable for an application
To command smooth speed transition
with terminals
To set the starting frequency
To set optimum acceleration/
deceleration time automatically
To set V/F pattern for lift automatically
5.8.1
Setting the acceleration and deceleration time
The following parameters are used to set motor acceleration/deceleration time.
Set a larger value for a slower acceleration/deceleration, and a smaller value for a faster acceleration/deceleration.
Parameter to set
Acceleration/deceleration
time
Acceleration/deceleration
pattern and backlash
measures
Remote setting function
Starting frequency and start-
time hold
Automatic acceleration/
deceleration
Lift operation(Automatic
acceleration/deceleration)
5.8 (F) Setting of acceleration/deceleration time and acceleration/deceleration pattern
Pr.7, Pr.8, Pr.16,
P.F000 to P.F003,
Pr.20, Pr.21, Pr.44,
P.F010, P.F011,
Pr.45, Pr.110,
P.F020 to P.F022,
Pr.111, Pr.147,
P.F030, P.F031,
Pr.611, Pr.791,
P.F040, P.F070,
Pr.792, Pr.1103,
P.F071, P.G264
Pr.1349
P.F100, P.F200 to
Pr.29, Pr.140 to
P.F203, P.F300 to
Pr.143, Pr.380 to
P.F303, P.F400 to
Pr.383, Pr.516 to
P.F403
Pr.519
P.F101
Pr.59
P.F102, P.F103
Pr.13, Pr.571
P.F500, P.F510 to
Pr.61 to Pr.63,
P.F513
Pr.292
P.F500, P.F510,
Pr.61, Pr.64, Pr.292
P.F520
1
2
Refer to page
3
349
4
354
5
359
6
363,
364
365
7
368
8
9
10
349
5. PARAMETERS