ABB IRB 7600 Series Product Manual page 111

xx0600002973
A
B
Required equipment
Equipment, etc.
Mechanical stop set, axis 3
Standard toolkit
User's guide - S4Cplus (Base-
Ware OS 4.0) (RobotWare 4.0)
Technical reference manu-
al - System parameters
Product manual - IRB 7600
3HAC022033-001 Revision: V
2.6.4 Mechanically restricting the working range of axis 3
Mechanical stop pin, axis 3
Attachment screw and washer
Art. no.
3HAC13128-2
-
-
© Copyright 2007 - 2018 ABB. All rights reserved.
2 Installation and commissioning
Note
Includes six stops, one with 80° re-
striction, 3HAC12708-4 (use when
limitation angle >=80), and five with
20°, 3HAC 12708-2.
Includes attachment screws.
Content is defined in section
tools on page 439.
Art. no. is specified in section
ences on page 10.
Continues on next page
Continued
Standard
Refer-
111