3.3.10 Inspecting the axis-1 mechanical stop pin
Location of mechanical stop pin
The axis-1 mechanical stop is located as shown in the figure.
xx0200000151
A
Required equipment
Visual inspection, no tools are required.
Product manual - IRB 7600
3HAC022033-001 Revision: V
WARNING
Mechanical stop pin can not be fitted onto robot if option 810-1 Electronic Position
Switch is used.
WARNING
Mechanical stop pin can not be fitted onto robot if option 561-1 Extended work
range axis 1 is used.
Mechanical stop pin
© Copyright 2007 - 2018 ABB. All rights reserved.
3.3.10 Inspecting the axis-1 mechanical stop pin
3 Maintenance
Continues on next page
167