ABB IRB 7600 Series Product Manual page 151

7
8
9
10
11
12
Product manual - IRB 7600
3HAC022033-001 Revision: V
Action
Add oil if required.
Open the oil plug, filling/inspection, in the second-
ary gearbox.
Measure the oil level.
Required oil level: 0-10 mm
Add oil if required.
Refit the oil plugs.
WARNING
Do not mix oil types! If wrong oil is refilled, the
gearbox must be rinsed as detailed in Technical
reference manual - Lubrication in gearboxes.
© Copyright 2007 - 2018 ABB. All rights reserved.
3.3.5 Inspecting the oil level in axis-4 gearbox
Note
Where to find type of oil and total
amount is detailed in
amount of oil in gearboxes on
page 181.
Detailed in section
axis-4 gearbox on page
Shown in the figure
gearbox on page
xx1400002785
A Oil plug hole
B Required oil level
C Gearbox oil
Where to find type of oil and total
amount is detailed in
amount of oil in gearboxes on
page 181.
Detailed in section
axis-4 gearbox on page
Tightening torque: 24 Nm.
3 Maintenance
Continued
Type and
Changing oil,
193.
Location of
149!
A
B
C
Type and
Changing oil,
193.
151